PELLETIZER - IceMaker PR750HPR750H Technical dataPR750H IncludedPR750H Accessories
| |
IceMaker PR750H
Production of high-density dry ice pellets.
The IceMaker PR750H from IceTech represents a state of the art
Dry Ice Pelletizer packed with features for easier operation, swift
production shifts and high capacity.
|
 |
|
|
|
|
The IceMaker PR750H produce high quality Dry Ice pellets from
stroke one. This is secured by the closed chamber technology
which also ensures fast production shifts and an extreme short
start up time.
|
|
|
The automatic change of extruder plates also removes downtime
and reduces loss of valuable CO2. The pellet length and quality
are optimized using the new pelletizer, and the complete version
of the IceMaker PR750H can produce two sizes of pellets at
the same time. The IceMaker PR750H contains lots of technical
features compared to existing products on the market.
For instance a heat exchanger is used to minimize waste of
energy during the sublimation process. The hydraulic unit use
logic components for higher performance. |
|
|
|
|
|
The machine parts are protected by a moisture-free enclosure,
which also reduces the noise level to a minimum (below 75 dB(A).
The IceMaker PR750H provides a non-stop supply of high-density
dry ice pellets. The source of raw material for the production of
pellets is liquid carbon dioxide conserved at low temperature in a
storage tank.
|
|
|
The liquid CO2 flows into the machine in a regulated manner
and is transformed into CO2 snow which is then pressed
through an extruder plate by means of the horizontal movement
of a hydraulic driven piston. |
|
|
The IceMaker PR750H is build on the latest technical advances in
industrial PC controls which includes a 12.1” color touch display
optimized for easy and intelligent control via multi-lingual context.
It’s also prepared for easy integration in your company’s control
system. It can be a simple remote start/stop button or a more
sophisticated solution via a BUS/Ethernet connection. |
|
|
If the IceMaker PR750H is connected to your LAN or Internet,
the entire display can be transferred to the computer desktop
of your choice – anywhere in the world. |
|
|
 IceTech Dry Ice Production PR750H |
|
|
|
|
IceMaker PR750H
Production of high-density dry ice pellets.
|
Dimensions mm/inch:
|
Length: 1500 / 59
Width: 1500 / 59
Height: 1800 / 71
Height: 1845 / 73.6 (incl. ext. legs)
|
|
Weight:
|
kg: 1700 / lbs: 3747
|
|
Rated Output:
|
kg/h: up to 750
lbs/h: up to 1653
of high quality dry ice pellets, depending
on the extruder plate applied
|
|
Pellet Size:
|
Diameter:
mm : 3 - 10 or 16
inch: 0.11 - 0.39 or 0.62
|
|
Cylindrical
- length varying from:
|
mm: 50 to 100
inch: 1.96 to 3.93
|
|
Inlet Liquid CO2 Pressure:
|
bar: 16 - 22
psi: 232 - 319
|
|
Liquid CO2 Dryness Fraction:
|
The water content should not exceed 35 ppm and
should not be less than 5 ppm – or equivalent to a
dewpoint temperature of -66°C to -51°C
(-86.8°F to -59.8°F).
NOTE:
The liquid CO2 supply must be completely free of oil and
must have a purity of min. 99.9%.
|
|
Liquid CO2 Supply Pipe:
|
Internal dia. 20 mm (0.8 inch), very well insulated with
a minimum number of bends and fittings.
NOTE:
If over 20 m (65.6 feet) in length, always use an
internal dia. of 25 mm (1 inch).
|
Outlet Pipe:
|
Internal dia. 125 mm (5 inch)
|
Power Supply:
|
3 x 400 V AC + PE, 50/60 Hz, Imax. 32 A
|
IceMaker PR750H
Production of high-density dry ice pellets.
|
|
|
| Process unit |
|
|
|
|
|
|
Process unit
|
Weight
kg: 57,5
lbs: 125.6
Item no.: 501415
|
 |
|
|
|
|
Lower Screen
for die holder
|
Weight
g: 512
lbs: 1.128
Item no.: 501330 |
 |
|
Upper Screen
for die holder
|
Weight
g: 512
lbs: 1.128
Item no.: 501324 |
 |
|
|
|
|
Grip knob for screen
|
Weight
g: 6
lbs: 0.013
Item no.: 501332 |
 |
|
|
|
| Outlet Sprout |
|
|
|
|
|
|
Outlet Sprout
|
Weight
g: 1244
lbs: 2.742
Item no.: 501480 |
 |
|
Flange for Outlet Sprout
|
Weight
g: 1111
lbs: 2.449
Item no.: 501481 |
 |
|
Clamp for Outlet Sprout
Incl. Packing
|
Weight
g: 689
lbs: 1.518
Item no.: 501482 |
 |
|
|
 |
|
|
|
| Technical Support |
|
|
|
|
|
|
Telephone
|
IceTech technical staff
will guide you through...
24-hour Technical Support hotline
|
|
GSM Modem or WAN/LAN
|
IceTech technical staff can connect to the PLC
anywhere in the world via GSM Modem or
WAN/LAN for troubleshooting |
|
|
|
|
| Technical Documtation |
|
|
|
|
|
User manual
|
Contains step-by-step illustration
for the differet operations,
-online webinars and tutorials.
|
|
Sparepart lists
|
Exploded assembly drawings and
listet sparepart.
|
|
Diagrams
|
Wiring diagram and flow diagram.
|
|
|
|
|
IceMaker PR750H
Production of high-density dry ice pellets.
|
|
|
| Extruder Plate |
|
|
|
|
|
|
Extruder Plate:
3 mm, complete
|
Pellets Size
mm: 3
inch: 0.118
Weight
g: 3027
lbs: 6.673
Item no.: 501478
|
 |
|
|
|
|
Extruder Plate:
10 mm, complete
|
Pellets Size
mm: 10
inch: 0.393
Weight
g: 3562
lbs: 7.852
Item no.: 501327
|
 |
|
|
|
|
Extruder Plate:
16 mm, complete
|
Pellets Size
mm: 16
inch: 0.629
Weight
g: 4071
lbs: 8.975
Item no.: 501328
|
 |
|
|
|
Extruder Plate:
Upon request IceTech can supply
18 mm / 0.708inch extruder plates |
|
|
|
|
|
|
|
|
| Hydraulic oil |
|
|
|
|
|
Hydraulic oil
ESSO Marcol 152 32
|
Amount
L: 300
Gallon: 79
Item no.: 500935
|
|
|
|
|
| Mounting Kit |
|
|
|
|
|
|
Mounting kit for
installation of IceMaker PR750H
and additional CO2 filtration
|
Item no.: 105062
|
|
|
|
|
| Service Kit |
|
|
|
|
|
2,500 hour
Service kit for Pelletizer PR750H
|
|
|
5,000 hour
Service kit for Pelletizer PR750H
|
|
|
|
|
|
| Dry Ice Container |
|
|
|
|
|
For the storage of dry ice pellets.
|
|
|
|
|
|
|
Pelletizer 
